CUTCRAFT WoodMax E20

The 20T in electric form: quiet, no exhaust.

Available · CC-WME20

48cm
Maximum log diameter: 20t
Splitting force: 7.5kW
Engine power

The WoodMax E20 keeps the frame and the workflow of the 20T — same 48 cm capacity, same 55 cm cut, same conveyor — swapping the petrol engine for a 7.5 kW three-phase 380 V motor. The splitting cycle drops to eight seconds.

Who it is for

For anyone working under a roof or close to housing: holdings wired for three-phase, workshops, authorities with noise limits.

In practice

Inside a closed building, a petrol engine means ventilation and breaks. The E20 runs all day with no exhaust and no refuelling, at a markedly lower hourly cost. It does need a three-phase socket within cable reach.

Technical specifications

Engine

Engine type: Electric
Power supply: Three-phase 380 V / 50 Hz
Engine power: 7.5kW

Splitting

Splitting force: 20t
Splitting knife: 4 way (6 way optional)
Output: 4cu. m/h
Cycle time: 8s
Cylinder bore: 4″

Cutting

Maximum log diameter: 48cm
Cutting length: 55cm
Chainsaw bar: 50cm
Hydraulic flow: 36L/min
Saw speed: 4,800rpm

Equipment

Infeed conveyor: 2m
Outfeed conveyor: 3.2m
Belt width: 250mm

Dimensions and weight

Dimensions (L × W × H): 250 × 150 × 180 cm
Weight: 520kg

Gallery

Options

4-way splitting knife — 20 t
CC-KN4-20T
Four splits per stroke on medium sections. This is the knife fitted as standard, and the one that suits most open-fire firewood deliveries.
6-way splitting knife — 20 t
CC-KN6-20T
Six splits per stroke, for smaller stove wood. The gain in rate is clear on regular rounds; on knotty timber, 20 tonnes starts to show.
WM1200 — 180 kg hydraulic log lifter
CC-WM1200
Lifts up to 180 kg to table height, with an integrated rotator. It solves the real problem of a day's splitting: it is not the machine that tires, it is the operator doing the lifting.