CUTCRAFT WoodMax 30T

The production processor: 30 tonnes, six cubic metres an hour, joystick.

Available · CC-WM30T

50cm
Maximum log diameter: 30t
Splitting force: 6cu. m/h
Output

The WoodMax 30T steps up on every count: Honda GX630 with electric start, 60 cm chainsaw bar turning at 10,000 rpm, 30-tonne splitter with 4, 6 or 8 way knife, 3.5 m conveyor. The controls sit together on one joystick.

CUTCRAFT WoodMax 30T Firewood processor, unfolded in working position

Who it is for

For firewood producers who deliver, agricultural contractors and public authorities: a machine sized to run several days a week.

CUTCRAFT WoodMax 30T Firewood processor, control station

In practice

On knotty 50 cm oak, 30 tonnes go through where 20 stall. The real gain is elsewhere: the 1.8 m hydraulic infeed means you never carry a billet, and over a full day it is the operator's back that sets output.

CUTCRAFT WoodMax 30T Firewood processor, cutting head

Technical specifications

Engine: Honda GX630
Engine type: Petrol
Starting: Electric

Options

4-way splitting knife — 30 t
CC-KN4-30T
The configuration to choose on large, knotty diameters: fewer ways, more force available per split.
6-way splitting knife — 30 t
CC-KN6-30T
The usual production compromise: six splits per stroke with 30 tonnes behind, leaving margin on irregular timber.
8-way splitting knife — 30 t
CC-KN8-30T
For 33 cm splits delivered in volume. Keep it for straight timber of even diameter: eight ways through a big knotty round will stall even 30 tonnes.
WM1200 — 180 kg hydraulic log lifter
CC-WM1200
Lifts up to 180 kg to table height, with an integrated rotator. It solves the real problem of a day's splitting: it is not the machine that tires, it is the operator doing the lifting.